PETTIT TRINIDAD PRO ANTIFOULING BOTTOM PAINT - Trinidad PRO is a hard protective paint which produces the most durable finish for long lasting performance. The high loading of cuprous oxide combined with a specially formulated algicide results in unprecedented resistance to barnacles,algae, slime and other marine and fresh-water fouling organisms. It can be applied over most hard antifouling coatings. Old soft antifouling paints must be removed before applying Trinidad PRO. Trinidad PRO has excellent adhesion to fiberglass, wood and steel hulls and is perfect for both power and sail boats. Its compatibility with all properly prepared hard bottom paints permits safe overcoating without fear of lifting. Product is sold by the gallon. 2 gallons per case.
APPLICATION DATA
Method: Brush, Roller, Airless or Conventional Spray. When applying by roller use a short nap (3/16 inch maximum) roller cover.
Number of Coats: 2
Dry Film Thickness Per Coat: 2 mils (3 wet mils)
Application Temp: 40°F Min. / 90°F Max.
Dry Times (Hours) @ 70°F: To Recoat - 4 & To Launch - 16
Amount of Copper: 70% Cuprous Oxide
Thinner: 120 Brushing Thinner or 121 Spray Thinner
APPLICATION INFORMATION
Trinidad Pro is heavily loaded with cuprous oxide. As a result of this there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible shake the can of paint on a mechanical paint shaker. Before using check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly. Adhere to all application instructions, precautions, conditions and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. Do not thin Trinidad Pro more than 5% (6 ounces per gallon) or inadequate paint film thickness will occur and premature erosion of the finish will be likely.
Surface Preparation: Coating performance, in general, is proportional to the degree of surface preparation. Follow recommendations carefully, avoiding shortcuts. Inadequate preparation of surfaces will virtually assure inadequate coating performance.
Maintenance: No antifouling paint can be effective under all conditions of exposure. Man made pollution and natural occurrences can adversely affect antifouling paint performance. Extreme hot and cold water temperatures, silt, dirt, oil, brackish water and even electrolysis can ruin an antifouling paint. Therefore, we strongly suggest that the bottom of the boat be checked regularly to make sure it is clean and that no growth is occurring. Lightly scrub the bottom with a soft brush to remove anything from the antifouling paint surface. Scrubbing is particularly important with boats that are idle for extended periods of time. The self-cleaning nature of the coating is most effective when the boat is used periodically.
SHIPPING NOTE: Item is NOT hazardous if shipped with ground, but is considered hazardous when shipped by air.
LINKS: To view the PDS sheet for Pettit Trinidad Pro: CLICK HERE
To view the MSDS sheet for Pettit Trinidad Pro: CLICK HERE