Select Page

Awlgrip D3730 Hullgard Extra Converter

$61.98 $37.19

Hullgard Extra Primer is a two component epoxy substrate primer with excellent anticorrosive properties. It offers excellent aged recoatability and provides a perfect base for subsequent fairing with Awlfair fairing compound(s).

Description

AWLGRIP HULLGARD EXTRA EPOXY PRIMER D3730 CONVERTER – PART “B” ONLY Hullgard Extra Primer is a two component epoxy substrate primer with excellent anti-corrosive properties. It offers excellent aged recoatability and provides a perfect base for subsequent fairing with Awlfair fairing compound(s). Product is sold by the quart.

MIX RATIO

Check for settling, then thoroughly mix the base until a consistent homogeneous blend is obtained. Power mixers or shakers are preferred. If not available thorough hand mixing is acceptable. Add converter and thoroughly mix again.

Mix ratio by volume is: 10 parts D6120 (sold separately) : 1.5 parts D3730. Reduction is not normally required but at lower temperatures small amounts (5%) of T0006 can be added. Do not reduce more than 15%.

Induction time 10 minutes.
Anticipated Pot Life at 25°C/ 77°F, 50% RH: 8 hours

SHIPPING NOTE: Product is considered hazardous if shipping by air.

LINKS:

Awlgrip Hullgard Extra Epoxy Primer – TDS

Awlgrip Hullgard Extra Epoxy Primer Converter D3730 – SDS

Additional information

Weight 3.0000 lbs
Dimensions 0.0000 × 0.0000 × 0.0000 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.