no-image

Imron VGY611 Spray Activator

$136.98 $82.19

VGY611 Activator is to be used to catalyze Imron 2.8 FT-C (613P) Flat Clear Polyurethane.

SKU: VGY611-4 Category:

Product Description

AXALTA IMRON VGY611 ACTIVATOR – PART “B” ONLY VGY611 Activator is to be used to catalyze Imron 2.8 FT-C (613P) Flat Clear Polyurethane. Sold by the quart.

MIX RATIO: Thoroughly mix 3 parts Imron 2.8 FT-C (613P), then add 1 part Imron VGY-611 Activator while stirring. No induction period is necessary. DO NOT SHAKE. If air bubbles are excessive as a result of stirring, agitating or boxing the base material, allow the bubbles to dissipate prior to activation. Normally 0-3% reduction is adequate for spray application depending upon conditions and equipment. Maximum reduction should not exceed 3%. Use Axalta 68083 Thinner. If faster recoat and handling is required, add up to 2 oz./gal. MasterTint 389S Accelerator.

SHIPPING NOTE: Product is considered hazardous if shipping by air.

LINKS:

Imron VGY611 Activator – SDS

Additional Information

Weight 3.0000 lbs
Dimensions 0.0000 x 0.0000 x 0.0000 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.