AWLGRIP AWLWOOD MA OT0201 BRUSH REDUCER – OT0201 Brushing Reducer is a slow evaporating thinner formulated to assist in extending the wet edge of the Awlwood MA products in hot or windy conditions. It can also be used for rinsing OT0200 Brush Cleaner from brushes prior to use with the Awlwood MA products, for rinsing brushes that have become stiff with part cured Awlwood MA and as a surface cleaner between coats if contamination problems occur. OT0201 as flushing solvent: Work into brushes that have been washed with OT0200 Brush Cleaner to flush, then shake out well. If brushes have stiffened part-way through a job, work into bristles and shake out before recommencing. Repeat if necessary. OT0201 as Brushing Reducer: Use at recommended levels noted above. Always ensure product is mixed well before use. When brushing the final coat, where possible it is advisable to wait for light winds and overcast conditions, or very early on a still morning to ensure the best possible finish from the products. OT0201 as Cleaner: If contamination is suspected, sand well between fully cured coats and wash applying the OT0201 Brushing Reducer using a rag. Scrub then remove this material with clean rags. Product is sold by the quart.
SHIPPING NOTE: Product is considered hazardous if shipping by air.
To view the PDS for Awlgrip Awlwood MA Brush Reducer: CLICK HERE
To view the SDS for Awlgrip Awlwood MA Brush Reducer T0201: CLICK HERE