AWLGRIP HULLGARD EXTRA EPOXY PRIMER D6120 BASE – PART “A” ONLY Hullgard Extra Primer is a two component epoxy substrate primer with excellent anticorrosive properties. It offers excellent aged recoatability and provides a perfect base for subsequent fairing with Awlfair fairing compound(s). Hullgard Extra primer also has superb adhesion to properly prepared fiberglass, steel, aluminum and wood. For use above and below the waterline. Product is sold by the gallon.
Check for settling, then thoroughly mix the base until a consistent homogeneous blend is obtained. Power mixers or shakers are preferred. If not available thorough hand mixing is acceptable. Add converter and thoroughly mix again.
Mix ratio by volume is: 10 parts D6120 : 1.5 parts D3730 (sold separately). Reduction is not normally required but at lower temperatures small amounts (5%) of T0006 can be added. Do not reduce more than 15%.
Induction time 10 minutes.
Anticipated Pot Life at 25°C/ 77°F, 50% RH: 8 hours
SHIPPING NOTE: Product is considered hazardous if shipping by air.
Awlgrip Hullgard Extra Epoxy Primer – TDS
There are no reviews yet.