AWLGRIP QUICK BUILD SEALER ACTIVATOR – PART “C” ONLY Quick Build is high performance yacht priming system, formulated to provide a quick and convenient application. Using just six colored primers, Quick Build can closely match any finish, reducing the number of stages required to produce outstanding results. Can be directly overcoated with Awlcraft SE, Awlcraft 2000, Awlgrip, or Awlgrip HDT Topcoat. (Please refer to TDS for overcoat times). Product is sold by the gallon.
- Can be applied directly to certain substrates with no other primers required
- Easy application system for preparation and application in a single day
- Vibrant colors in just minutes, closely matching finish colors for quicker hide
Quick Build Sealer may be directly applied to aluminum, anodized aluminum, gelcoat, fiberglass and existing coatings in good condition.
Aluminum: Sand using 180-220 grade (grit) paper. Optional: Prime with Wash Primer CF.
Gelcoat/Fiberglass: Scotch-Brite or sand with 220 to 320 grade paper.
Existing Finishes: Sand with 220 – 320 grade dry sand paper.
Stir individual components well before use. Mix to a smooth, homogeneous mixture.
Mix by volume: 4 Parts Base (sold separately) : 1 Part U3100 Converter (sold separately) : 1.5 Parts A3110 Sealer Activator. No induction required.
There is no need to reduce Quick Build. However, 5 to 10% Awlgrip Reducers (T0001, T0002, T0003, T0005) can be added to ease the application
SHIPPING NOTE: Product is considered hazardous if shipping by air. If you choose to ship this product by Air, we will contact you prior to shipping the order to notify you of the actual shipping cost. Any questions, please give us a call. Thank you for understanding.