AWLGRIP HOT WEATHER REDUCER FOR URETHANE TOPCOATS T0005 – Use T0005 in Awlgrip, Awlcraft 2000, and Awlcraft SE Topcoats when application and cure temperatures are 90 – 105°F (32 – 41°C). T0005 is most often used as an additive, blended with other spray reducers to improve flow. T0005 is seldom the sole reducer. At lower temperatures (below 90°F/32°C) T0005 can be blended at any ratio with other Awlgrip topcoat reducers to improve flow with those products or increase the evaporation rate of T0005. T0005 has a very slow evaporation rate. Using T0005 at temperatures below 75°F (24°C) may result in very long dry and tape times. Product is sold by the quart.
WARNING: Large amounts of T0005 in flat or semi-gloss products may result in higher gloss levels. Use care when adding T0005 to these products.
SHIPPING NOTE: Product is considered hazardous if shipping by air.