AXALTA IMRON 2.8 FLAT CLEAR POLYURETHANE – PART “A” ONLY Imron 2.8 FT-C Flat Clear is an aliphatic polyurethane enamel, high-solids, two-package, VOC conforming product (2.8 lbs./gal.) based on unique Axalta resin technology, producing properties of both polyester and acrylic polyurethanes. This clearcoat is designed to be a highly durable finish that delivers industry leading polyurethane performance. Sold by the gallon.
As a high performance clear topcoat over finishes in sound condition on steel, galvanized steel, stainless steel, aluminum, concrete, concrete block, fiberglass, plastics and wood where:
- Restoring faded finishes without gloss avoids the cost of complete re-painting
- Outstanding color protection without gloss is desired
- Resistance to chemical and/or marine environments is required
- Application must be made at temperatures as low as 35° F
Normally 0-3% (1-4 oz.) reduction is adequate for spray application depending upon conditions and equipment. Maximum reduction should not exceed 3%. Use DuPont 68083 Thinner. If faster recoat and handling is required, add up to 2 oz./gal VG-805 Accelerator.
Note: Enamel is short-filled to allow for addition of activator. Do not shake. If air bubbles are excessive as a result of stirring, agitating or boxing the base material, allow the bubbles to dissipate prior to activation.
SHIPPING NOTE: Product is considered hazardous if shipping by air.