TEAKDECKING SYSTEMS FFE200 FITTING & FAIRING EPOXY KIT – TDS FFE-200 Fitting & Fairing Epoxy is a custom blended epoxy mastic of high quality resins, activators and engineered fillers to yield a light weight, flexible and easily-sanded system used for both fairing of deck substrates and the final glue-down of deck panels. FFE-200 weighs only 6 pounds per gallon when cured, and its cell-like structure makes it an excellent sound and thermal insulator. The viscosity of the FFE-200 is formulated to be high enough to stay in place when used for fairing, but low enough to provide excellent wet-out for bonding. The FFE-200 Fitting & Fairing Epoxy will cure in temperatures as low as 45º F. Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77° F, a layer of FFE-200 applied with a 3/16″ toothed trowel will have an open time of approximately 60-70 minutes, the material will set in approximately 4-6 hours, and complete cure will be achieved in approximately 24 hours. Sold by the 2 gallon kit.
COVERAGE: Approximately 30 ft² (2.8m²) / Gal.
SHIPPING NOTE: Product is considered hazardous if shipping by air. If you choose to ship this product by Air, we will contact you prior to shipping the order to notify you of the actual shipping cost.