TEAKDECKING SYSTEMS FITTING EPOXY 180 KIT -TDS FE-180A Fitting Epoxy has been formulated to achieve outstanding bond strength to most common marine materials including teak, other woods, fiberglass, aluminum and steel. The specially-engineered fillers allow the FE-180A to display superior wet-out of the bonding surfaces resulting in both a mechanical and chemical bond to adhere to even the most challenging substrates.
Once cured, FE-180A Fitting Epoxy provides excellent water-resistance, flexibility and internal strength which ensures the long term stability of the composite structure. TDS FE-180A Fitting Epoxy will cure in temperatures as low as 50º F. Developed to be user-friendly, the simplified 1:1 mix ratio allows a batch of any size to be easily measured and mixed. Once thoroughly mixed, the material can be spread immediately, requiring no induction time. At 77° F, a layer of FE-180A applied with a 3/16″ toothed trowel will have an open time of approximately 120-130 minutes, the material will set in approximately 6-8 hours, and complete cure will be achieved in approximately 24-36 hours. Sold by the gallon kit and 2-gallon kit.
COVERAGE: Approximately 30 ft² (2.8m²) / Gal.
SHIPPING NOTE: Product is considered hazardous if shipping by air. If you choose to ship this product by Air, we will contact you prior to shipping the order to notify you of the actual shipping cost.